Skip to main content
Roll-Up Bunting Printing
Roll-Up Bunting Printing

Professional Display, Ready in Seconds

A portable and professional display solution for retail promotions, exhibitions, seminars, corporate events and sales booths. Each complete set includes printing, a roll-up stand and a carrying bag.

80 cm × 200 cm PP Synthetic Paper Single or Double-Sided Portable and Reusable
Package Options

Single-Sided or Double-Sided

Choose the most suitable display based on your location, viewing direction and promotional requirements.

Most Popular Single-Sided Roll-Up Bunting

Single-Sided Roll-Up Bunting

Printed on the front side only. Ideal for placement near entrances, reception counters, exhibition booths or against a wall.

RM150 Per Unit For 1–2 units
RM135 Per Unit For 3–5 units
RM120 Per Unit For 6–9 units
RM105 Per Unit For 10 units & above
Display Size 80 cm × 200 cm
Material PP Synthetic Paper
Printing Single-sided printing
Stand Type Single-sided roll-up stand
Includes printing, roll-up stand and carrying bag
Two-Way Display Double-Sided Roll-Up Bunting

Double-Sided Roll-Up Bunting

Two printed panels are installed back-to-back on one double-sided stand. Ideal for open spaces where the display can be viewed from two opposite directions.

RM420 Per Unit For 1–2 units
RM378 Per Unit For 3–5 units
RM336 Per Unit For 6–9 units
RM294 Per Unit For 10 units & above
Display Size 80 cm × 200 cm per side
Material PP Synthetic Paper
Printing Two printed panels
Stand Type Double-sided roll-up stand
Includes 2 printed panels, double-sided stand and carrying bag
i

All prices shown are per unit. For example, an order of 2 single-sided units is calculated at RM150 per unit. Quantity rates apply according to the total number of units ordered and may be subject to the same artwork.

Additional Options

Already Have a Roll-Up Stand?

Order replacement printing only, purchase a stand separately, or bring your existing stand for installation.

Single-Sided

Separate Options

P

Print Only

RM94 One printed panel
S

Stand Only

RM56 Printing not included
+

Installation

RM20 On customer's existing stand
Double-Sided

Separate Options

P

Print Only

RM188 Two printed panels
S

Stand Only

RM232 Printing not included
+

Installation

RM40 On customer's existing stand

What Does the Installation Charge Include?

The installation charge applies when the customer brings an existing roll-up stand. The service includes removing the old printed panel, installing the new panel, adjusting the alignment and testing the rolling mechanism.

Installation is subject to the condition, model and compatibility of the customer's stand. Repairs, replacement springs, support poles, casing components and other spare parts are not included.
Product Benefits

Portable, Practical and Professional

Roll-Up Bunting provides an effective promotional display that is easy to transport, assemble, store and reuse.

1

Quick Setup

Pull the printed panel upwards and attach the support pole. No special tools are required.

2

Easy to Carry

The printed panel retracts into the casing and can be stored inside the included carrying bag.

3

Professional Display

The tall vertical display helps your promotion remain visible and attracts attention from a distance.

4

Reusable Stand

The stand can be reused for future campaigns by replacing the printed panel when required.

Recommended Applications

Exhibitions & Expos Sales Booths Seminars Conferences Retail Promotions Product Launches Corporate Events School Programmes Directional Signage Community Campaigns
Roll-Up Bunting is designed mainly for indoor use. Outdoor use, especially in windy areas, may cause the stand to fall or become damaged.
Optional Finishing

Gloss or Matte Lamination

Lamination provides additional surface protection against light scratches, dirt and moisture.

Gloss

Gloss Lamination

Creates a shiny finish that improves colour vibrancy and gives the printed panel a brighter appearance.

Single-Sided
+RM24
Double-Sided
+RM48
Matte

Matte Lamination

Provides a smooth and elegant finish while helping to reduce reflections under strong indoor lighting.

Single-Sided
+RM24
Double-Sided
+RM48

Artwork Preparation Guide

Prepare your artwork according to the following specifications for the best printing results.

  • Final artwork size: 80 cm × 200 cm
  • Recommended resolution: 150–300 DPI
  • Colour mode: CMYK
  • Preferred file format: PDF
  • Other accepted formats: AI, PSD, TIFF or JPEG
  • Convert all fonts to outlines
  • Use high-resolution images
  • Check spelling and information before submission
Keep logos, contact numbers and important information away from the bottom edge. We recommend leaving approximately 10 cm of safe space at the bottom because part of the printed panel will remain inside the roll-up mechanism.
Production Time

Estimated Turnaround Time

Production begins after payment, artwork and all order details have been confirmed.

Normal
3–5 Days No additional charge
Super Urgent
Approximately 2 Hours Additional +100%
Urgent and super urgent services are subject to order quantity, stock availability, artwork approval time and current production capacity.
Ordering Process

How to Place an Order

1

Select Your Roll-Up Type

Choose single-sided or double-sided and confirm the required quantity.

2

Submit Your Artwork

Send your completed design file or provide the content required for design preparation.

3

Artwork Inspection

We will check the artwork size, resolution and printing suitability.

4

Make Payment

The order will be confirmed after payment has been received.

5

Printing and Assembly

Printing and assembly will begin after final artwork approval.

Design Service

Do You Need Help with the Design?

Design service is available. The design fee depends on the complexity, amount of content and materials provided.

  • Provide a high-resolution logo
  • Prepare the complete wording and information
  • Provide the images you would like to use
  • Share your preferred concept, style or colours
Ask About Design Service
Frequently Asked Questions

Roll-Up Bunting FAQ

Find answers to common questions about our Roll-Up Bunting printing service.

Does the package price include the roll-up stand?
Yes. Both single-sided and double-sided package prices include printing, the roll-up stand and a carrying bag.
How does the double-sided roll-up stand work?
The double-sided stand holds two separate printed panels back-to-back. One panel is visible from the front, while the second panel is visible from the opposite direction.
Can I purchase the roll-up stand only?
Yes. A single-sided stand costs RM56, while a double-sided stand costs RM232. Printing is not included.
Can I order replacement printing only?
Yes. Single-sided replacement printing costs RM94, while double-sided replacement printing costs RM188 for two panels.
What does installation on the customer's stand mean?
The customer must bring the existing roll-up stand to us. We will remove the old printed panel, install the new panel, align it and test the rolling mechanism.
Can every old roll-up stand be reused?
Not necessarily. Installation depends on the condition, model and compatibility of the stand. A damaged stand or faulty spring mechanism may not be suitable for reuse.
Does the installation charge include stand repairs?
No. The installation charge does not include repairs or replacement parts such as springs, support poles, casing components or other accessories.
Is Roll-Up Bunting suitable for outdoor use?
Roll-Up Bunting is recommended mainly for indoor use. Outdoor wind may cause the stand to fall or become damaged.
Is design service available?
Yes. The design fee depends on the design complexity, amount of content and materials provided by the customer.
When does the production time begin?
Production time begins after payment, artwork and all order details have been fully confirmed.

Ready to Order Your Roll-Up Bunting?

Send us your preferred type, quantity, required date and artwork through WhatsApp for price and production confirmation.

WhatsApp 012-412 2800